OPERATING INSTRUCTIONS
Introduction and safety instructions
What do these operating instructions tell you?
Note
These operating instructions provide you with all relevant information that
you need in order to perform the tasks described in the table of contents
quickly and easily.
It your are not able to accomplish some of the described steps of
this manual, it may be that you don’t have the rigth authority level.
In this case please contact your authorized dealer.
You will find more detailed information about the respective screens online
on your system if you press the F1 key or click the Help button.
Notes on cleaning
When cleaning the surface, be sure that you do not use any
caustic or scrubbing cleansers and that no liquid gets inside the
device.
Caution!
To avoid electrical shock, do not remove the cover. Leave all
maintenance to qualified personnel.
The device may only be operated by trained
persons! For security reasons and in order to avoid faulty
operation, any authorization code required for operation
should only be communicated to these persons.
Warning!
To avoid fire or electrical shock, never expose the device to rain or
humidity.
Warning!
Installation should only be undertaken by qualified customer service
personnel in accordance with all applicable electrical regulations.
Power connection!
Devices with or without power cords have voltage in the device as
soon as the power cord is plugged into the outlet. However, the
device is only ready for use if the power switch (ON/OFF) is on ON.
If you unplug the power cable from the outlet, the voltage supply to
the device is completely halted.
Service station:
Telephone:
BOSCH Security Systems GmbH
– 3 –
A1 02.03
Introduction to the system
When the computer is booted, the system runs automatically in the background and is able to respond to signals and record images. You
must only log on if you wish to perform operating tasks. Only authorized users have access to operate the system, based on a password.
Depending on your access privileges, with the user interface you can:
·view live images for monitoring purposes and manually switch camera views
·open the image archive and retrieve, print, and delete saved images
·perform system configuration
·perform an alarm simulation
You must log on to the system in order to commence operation.
After you have switched on the system and the live image screen appears, you will see a dialog box in the middle of the screen that invites
you to log on.
Password
Exiting the system / ending the program
For the password, there are no restrictions as to the type and number
of characters permitted.
Select System from the menu bar and click Exit system.
You can change the password on the System menu.
Logging on
Logon screen
Enter your user name and password and confirm with OK. You are
now on the live image.
The live image consists of the live image basic window, which is also
displayed if no video station was selected or one or several
connection windows
Changing users/logging off
On the System menu, you can change users or log off. During a
change of user, the system continues to run in the background. This
is recommended if you leave the system.
BOSCH Security Systems GmbH
– 4 –
A1 02.03
|